GROOVED PIPES AND FITTINGS – VIBTIS https://www.vibtis.al Turnkey Solution - Investment - Services Mon, 05 Nov 2018 08:47:25 +0000 en-US hourly 1 https://wordpress.org/?v=6.0.6 T-Shaped Hydrant with One Orifice https://www.vibtis.al/products/t-shaped-hydrant-with-one-orifice/ Sun, 09 Sep 2018 16:05:41 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5699 General
The T-Shaped Hydrant t of one orifice has an angular configuration while the one of two orifices has a "T" configuration. The body and the cover are constructed of ductile iron GGG40 DIN 1693. The piston is a registered patent and it is specially designed to eliminate the disadvantages of the other types of hydrants that are found to the market. As a great advantage could be considered that the piston and its base are made from metal, so great stability and resistance is effected. The elastic flange which is assembled between them, provides the total sealing, when the hydrant is closed. The whole activator system moves axialy by two leaders blocking the sideway movements and deformations and assuring total stability, safeness and resistance during the operation. The elastic separation diaphragm of the valve's chamber is constructed from a very flexible material in order to effect the easy movement of the piston with minimum losses. The piston's bases except of being the leader is also a flow regulator as it erases the whirlpool caused from the pump. The valve's chamber is connected with its entrance by a special little pipe from RILSAN PA 11 DIN 7434 or copper Cu F17 DIN 17671.

Applications

  • Irrigation
  • Water supply
  • Fire fighting pipelines

Advantages

The T-Shaped Hydrant are manufactured according to ISO 2531, DIN 2501, BS 4504/4772, NF 2910 and have the following advantages:
  • Very simple operation
  • Soft opening and closure with regulation ability
  • Light weight
  • No leakages
  • Pressure regulator different for each orifice if required
  • Automatic valve for anti-freezing protection
  • V-port for soft flow adjusted to the piston's base
  • Minimum maintenance with very low cost
  • Long life time
  • Close when pressure falls lower than the desirable level
  • The special construction of the activator eliminates damages and deformations which are caused by the different pressures on the hydrant during its operation.
  • Can be modified to an anti-hammer shock protection valve or to a pressure reducing valve, by adding a special pilot
  • They have the ability of electrically regulated operation by a PLC, or through an electric net work of low voltage
]]> General
The T-Shaped Hydrant t of one orifice has an angular configuration while the one of two orifices has a "T" configuration. The body and the cover are constructed of ductile iron GGG40 DIN 1693. The piston is a registered patent and it is specially designed to eliminate the disadvantages of the other types of hydrants that are found to the market. As a great advantage could be considered that the piston and its base are made from metal, so great stability and resistance is effected. The elastic flange which is assembled between them, provides the total sealing, when the hydrant is closed. The whole activator system moves axialy by two leaders blocking the sideway movements and deformations and assuring total stability, safeness and resistance during the operation. The elastic separation diaphragm of the valve's chamber is constructed from a very flexible material in order to effect the easy movement of the piston with minimum losses. The piston's bases except of being the leader is also a flow regulator as it erases the whirlpool caused from the pump. The valve's chamber is connected with its entrance by a special little pipe from RILSAN PA 11 DIN 7434 or copper Cu F17 DIN 17671.

Applications

  • Irrigation
  • Water supply
  • Fire fighting pipelines

Advantages

The T-Shaped Hydrant are manufactured according to ISO 2531, DIN 2501, BS 4504/4772, NF 2910 and have the following advantages:
  • Very simple operation
  • Soft opening and closure with regulation ability
  • Light weight
  • No leakages
  • Pressure regulator different for each orifice if required
  • Automatic valve for anti-freezing protection
  • V-port for soft flow adjusted to the piston's base
  • Minimum maintenance with very low cost
  • Long life time
  • Close when pressure falls lower than the desirable level
  • The special construction of the activator eliminates damages and deformations which are caused by the different pressures on the hydrant during its operation.
  • Can be modified to an anti-hammer shock protection valve or to a pressure reducing valve, by adding a special pilot
  • They have the ability of electrically regulated operation by a PLC, or through an electric net work of low voltage
]]> Underground hydrant DN 100 https://www.vibtis.al/products/underground-hydrant-dn-100/ Sun, 09 Sep 2018 16:03:57 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5697

ART.Nº: V4-01

PRIMJENA: voda, pitka voda DN: 100 TLAK: PN 10/16
Materijal: nodularni lijev Testirano prema EN 12266
]]>

ART.Nº: V4-01

PRIMJENA: voda, pitka voda DN: 100 TLAK: PN 10/16
Materijal: nodularni lijev Testirano prema EN 12266
]]> Surface hydrant Barok https://www.vibtis.al/products/surface-hydrant-barok/ Sun, 09 Sep 2018 16:03:13 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5695

ART.Nº: V4-11

APPLICATION: voda DN: 80 - 100 PRESSURE: PN 10/16
Installation flanges according to EN 1092-2 Sealing: EPDM (NBR)/EN GJS 400-15 Connection for fire pipes:
  • DN 80 2C 1B
  • DN 100 2B 1A
Installation depth: 1m, 1,25 m, 1,5 m
]]>

ART.Nº: V4-11

APPLICATION: voda DN: 80 - 100 PRESSURE: PN 10/16
Installation flanges according to EN 1092-2 Sealing: EPDM (NBR)/EN GJS 400-15 Connection for fire pipes:
  • DN 80 2C 1B
  • DN 100 2B 1A
Installation depth: 1m, 1,25 m, 1,5 m
]]> FIRELOCK™ MODEL V2754 https://www.vibtis.al/products/firelock-model-v2754/ Sun, 09 Sep 2018 15:59:30 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5693
  • Commercial
  • Light | Ordinary | Extra | Storage
  • K5.6 | S.I.8.1
  • Conventional
  • Quick Response
  • 1/2″ | 15 mm NPT
  • 135°, 155°, 175°, 200°, 286°, 360° (F)
  • 57°, 68°, 79°, 93°, 141°, 182° (C)
  • cULus
  • Brass, VC-250
  • 300 psi | 21 bar
  • Wrenches: V27, V27-2
    • ]]>
  • Commercial
  • Light | Ordinary | Extra | Storage
  • K5.6 | S.I.8.1
  • Conventional
  • Quick Response
  • 1/2″ | 15 mm NPT
  • 135°, 155°, 175°, 200°, 286°, 360° (F)
  • 57°, 68°, 79°, 93°, 141°, 182° (C)
  • cULus
  • Brass, VC-250
  • 300 psi | 21 bar
  • Wrenches: V27, V27-2
    • ]]>         SERIES 866-480 LEVEL CONTROL VALVE https://www.vibtis.al/products/series-866-480-level-control-valve/ Sun, 09 Sep 2018 15:58:21 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5691
  • Designed for Fire Protection applications
  • Hydraulically controlled, diaphragm actuated valve that shuts off at a pre-set reservoir full level and opens in response to a sensor in the altitude pilot mounted on the main valve
  • Globe valve body (Series 800E)
  • Sizes 1 ½ –12″ | DN40 – DN300
  • Pressures up to 250 psi | 1724 kPa | 17 bar
    • ]]>
  • Designed for Fire Protection applications
  • Hydraulically controlled, diaphragm actuated valve that shuts off at a pre-set reservoir full level and opens in response to a sensor in the altitude pilot mounted on the main valve
  • Globe valve body (Series 800E)
  • Sizes 1 ½ –12″ | DN40 – DN300
  • Pressures up to 250 psi | 1724 kPa | 17 bar
    • ]]>         SERIES 866-466 LEVEL CONTROL VALVE https://www.vibtis.al/products/series-866-466-level-control-valve/ Sun, 09 Sep 2018 15:57:31 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5688
  • Designed for Fire Protection applications
  • Hydraulically controlled, diaphragm actuated control valve that controls reservoir filling in response to a hydraulic on-off float pressure commands
  • Globe valve body (Series 800E)
  • Sizes 1 ½ –12″ | DN40 – DN300
  • Pressures up to 250 psi | 1724 kPa | 17 bar
    • ]]>
  • Designed for Fire Protection applications
  • Hydraulically controlled, diaphragm actuated control valve that controls reservoir filling in response to a hydraulic on-off float pressure commands
  • Globe valve body (Series 800E)
  • Sizes 1 ½ –12″ | DN40 – DN300
  • Pressures up to 250 psi | 1724 kPa | 17 bar
    • ]]>         SERIES 866-460 LEVEL CONTROL VALVE https://www.vibtis.al/products/series-866-460-level-control-valve/ Sun, 09 Sep 2018 15:55:56 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5686
  • Designed for Fire Protection applications
  • Hydraulically controlled, diaphragm actuated valve that controls reservoir filling to maintain constant water level, regardless of fluctuating demand
  • Globe valve body (Series 800E)
  • Sizes 1 ½ –- 12″ | DN40 – DN300
  • Pressures up to 250 psi | 1724 kPa | 17 bar
    • ]]>
  • Designed for Fire Protection applications
  • Hydraulically controlled, diaphragm actuated valve that controls reservoir filling to maintain constant water level, regardless of fluctuating demand
  • Globe valve body (Series 800E)
  • Sizes 1 ½ –- 12″ | DN40 – DN300
  • Pressures up to 250 psi | 1724 kPa | 17 bar
    • ]]>         SERIES 867-7UL PRESSURE REDUCING VALVE https://www.vibtis.al/products/series-867-7ul-pressure-reducing-valve/ Sun, 09 Sep 2018 15:54:57 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5684
  • Designed for Fire Protection applications
  • Double chamber actuator provides rapid response to changing system conditions
  • Advanced actuator design increases operating life
  • “Y” Pattern valve body (Series 800)
  • Sizes 1 ½ -– 16″ | DN40 – DN400
  • Pressures up to 350 psi | 2413 kPa | 24 bar
    • ]]>
  • Designed for Fire Protection applications
  • Double chamber actuator provides rapid response to changing system conditions
  • Advanced actuator design increases operating life
  • “Y” Pattern valve body (Series 800)
  • Sizes 1 ½ -– 16″ | DN40 – DN400
  • Pressures up to 350 psi | 2413 kPa | 24 bar
    • ]]>         SERIES 867-7UF PRESSURE RELIEF VALVE https://www.vibtis.al/products/series-867-7uf-pressure-relief-valve/ Sun, 09 Sep 2018 15:54:13 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5682
  • Designed for Fire Protection applications
  • Double chamber actuator provides rapid response to changing system conditions
  • Advanced actuator design increases operating life
  • “Y” Pattern valve body (Series 800)
  • Sizes 1 ½ -– 16″ | DN40 – DN400
  • Pressures up to 350 psi | 2413 kPa | 24 bar
    • ]]>
  • Designed for Fire Protection applications
  • Double chamber actuator provides rapid response to changing system conditions
  • Advanced actuator design increases operating life
  • “Y” Pattern valve body (Series 800)
  • Sizes 1 ½ -– 16″ | DN40 – DN400
  • Pressures up to 350 psi | 2413 kPa | 24 bar
    • ]]>         SERIES 867-459 PRESSURE RELIEF VALVE https://www.vibtis.al/products/series-867-459-pressure-relief-valve/ Sun, 09 Sep 2018 15:53:30 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5680
  • Designed for Fire Protection applications
  • Proprietary reinforced rolling elastomeric diaphragm
  • In-line serviceability eliminates the need to remove for service
  • Globe valve body (Series 800)
  • Sizes 1 ½ –- 12″ | DN40 – DN300
  • Pressures up to 175 psi | 1207 kPa | 12 bar
    • ]]>
  • Designed for Fire Protection applications
  • Proprietary reinforced rolling elastomeric diaphragm
  • In-line serviceability eliminates the need to remove for service
  • Globe valve body (Series 800)
  • Sizes 1 ½ –- 12″ | DN40 – DN300
  • Pressures up to 175 psi | 1207 kPa | 12 bar
    • ]]>