DISMANTLING JOINTS – VIBTIS https://www.vibtis.al Turnkey Solution - Investment - Services Sun, 09 Sep 2018 11:50:55 +0000 en-US hourly 1 https://wordpress.org/?v=6.0.6 Dismantling Joints https://www.vibtis.al/products/dismantling-joints/ Sun, 09 Sep 2018 11:50:54 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5267 General
  • The dismantling joint in a hydraulic installation is the necessary joining element between different fittings so that they are easily adjusted to the net or removed from it.
  • Rubber sealing ring is of special material and thickens, in order to assure a tight sealing and prevent the dismantling joint from being damaged.
  • When the dismantling joint is used for clean water in water supply or irrigation net the sealing ring is made of EPDM (temperature: -20oC to +130oC).
  • For impure water and sewage the sealing ring is made of VITON, which presents a remarkable resistance in both highly intoxicated water and high temperatures. (temperature: -10oC to +250oC).
  • In both cases the rubber ring does not present the slightest worn-out, that may be caused by external factors such as bad weather conditions or the sun.
  • The dismantling joints are manufactured for working pressures 10atm and 16atm and are tested in 25atm.
  • Dismantling joints from 25atm up to 64atm are available upon request.

Applications

  • Water supply, Irrigation Networks
  • Sewage networks

Advantages

  • Big tolerance in high pressures
  • Little maintenance necessary
  • Can be repaired without being removed from the pipeline
  • Long life time

Technical review

Sizes DN 50 up to DN1600 Workign pressure PN10, PN16, PN25, PN40, PN64atm Working Temperature -10oC up to +130oC Coating electrostatic epoxy powder, 200μm Materials:
  1. Body & flanges carbon steel St37
  2. Bolts &nuts galvanised steel (stainless steel upon request)
  3. Rubber sealing: EPDM EN681-1 (NBR or VITON upon request)
]]> General
  • The dismantling joint in a hydraulic installation is the necessary joining element between different fittings so that they are easily adjusted to the net or removed from it.
  • Rubber sealing ring is of special material and thickens, in order to assure a tight sealing and prevent the dismantling joint from being damaged.
  • When the dismantling joint is used for clean water in water supply or irrigation net the sealing ring is made of EPDM (temperature: -20oC to +130oC).
  • For impure water and sewage the sealing ring is made of VITON, which presents a remarkable resistance in both highly intoxicated water and high temperatures. (temperature: -10oC to +250oC).
  • In both cases the rubber ring does not present the slightest worn-out, that may be caused by external factors such as bad weather conditions or the sun.
  • The dismantling joints are manufactured for working pressures 10atm and 16atm and are tested in 25atm.
  • Dismantling joints from 25atm up to 64atm are available upon request.

Applications

  • Water supply, Irrigation Networks
  • Sewage networks

Advantages

  • Big tolerance in high pressures
  • Little maintenance necessary
  • Can be repaired without being removed from the pipeline
  • Long life time

Technical review

Sizes DN 50 up to DN1600 Workign pressure PN10, PN16, PN25, PN40, PN64atm Working Temperature -10oC up to +130oC Coating electrostatic epoxy powder, 200μm Materials:
  1. Body & flanges carbon steel St37
  2. Bolts &nuts galvanised steel (stainless steel upon request)
  3. Rubber sealing: EPDM EN681-1 (NBR or VITON upon request)
]]> Dismantling Joins MDK https://www.vibtis.al/products/dismantling-joins-mdk/ Sun, 09 Sep 2018 11:49:19 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5265

ART.Nº: V7-10C, V7-10D, V7-10F

APPLICATION: water, drinking water, waste water DN: 40 - 1600 PRESSURE: 10/16/25
Max. working temperature:​ 60°C (other on request) Installation flanges according to EN 1092-2 or on request according to other standard
]]>

ART.Nº: V7-10C, V7-10D, V7-10F

APPLICATION: water, drinking water, waste water DN: 40 - 1600 PRESSURE: 10/16/25
Max. working temperature:​ 60°C (other on request) Installation flanges according to EN 1092-2 or on request according to other standard
]]> Dismantling Joint MDK https://www.vibtis.al/products/dismantling-joint-mdk/ Sun, 09 Sep 2018 11:48:24 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5263

ART.Nº: V7-10 T

APPLICATION: water, drinking water, sea water PRESSURE: PN 10/16/25 DN: 1000 - 1600
Materijal:
  • body - ductile cast iron or steel welded
Installation flanges according to EN 1092-2 or on request according to other standard Test according to EN 12266
]]>

ART.Nº: V7-10 T

APPLICATION: water, drinking water, sea water PRESSURE: PN 10/16/25 DN: 1000 - 1600
Materijal:
  • body - ductile cast iron or steel welded
Installation flanges according to EN 1092-2 or on request according to other standard Test according to EN 12266
]]>