https://www.vibtis.al Turnkey Solution - Investment - Services Sun, 09 Sep 2018 17:45:34 +0000 en-US hourly 1 https://wordpress.org/?v=6.0.6 https://www.vibtis.al/products/g-160-combined-butt-and-socket-fusion-machine-for-industrial-applications/ Sun, 09 Sep 2018 17:45:19 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5812 In this form of fusion jointing, which requires heating tools, the pipe end is inserted into the socket of the fitting; no additional material is used. The pipe end and fitting socket are heated to fusion temperature using a heating bush and a heating spigot, respectively, and are then pushed together. GF Piping Systems offers a wide range of hand and mechanical guided fusion machines – also for the field-use. The pipe end, fitting socket and heating tools correspond in such a way that the necessary jointing pressure is attained during jointing, resulting in a homogeneous joint.  

• Mobile, very compact and universal plastic fusion machine for PP, PE and PVDF pipes and fittings for use in the workshop and on job sites. Butt fusion d 32 - 160 mm, all pressure ratings up to PE/PP SDR 11; PVDF SDR 21. Socket fusion d 16 - 110 mm Base machine
  • high precision, distortion-free and robust machine base
  • handwheel for easy moving of machine carriage
  • exact pressure adjustment via direct load transfer
  • hardened, hard-chrome plated guide shafts for extreme loads
  • handle for safe transport of machine
  • All clamping possibilities for base clamping plates, pipe supports, back stop and prismatic clamping devices.
  Planer
  • planing device made of light cast aluminium
  • optimised cutting geometry for even and chatter-free planing
  • powerful parallel planer, swivels in and out for single or double-sided facing of pipe ends 620 W
  • integrated pick up for easy mounting of calibration tools for machining of pipe ends in socket fusion
  Heater
  • high-performance and precision heater with electronic temperature control 1500 W
  • high accuracy of +/- 4°C over the entire heating surface
  • heater temperature can be set exactly with digital LCD
  • high quality, non-stick, easy to change PTFE fabric
  Additional standard equipment on the basic model
  • V-shaped pipe supports d 16 - 160 mm for fittings
  • timer to clock fusion times
  • tool set specified to machine
  • Including transport packaging, without accessories

]]> In this form of fusion jointing, which requires heating tools, the pipe end is inserted into the socket of the fitting; no additional material is used. The pipe end and fitting socket are heated to fusion temperature using a heating bush and a heating spigot, respectively, and are then pushed together. GF Piping Systems offers a wide range of hand and mechanical guided fusion machines – also for the field-use. The pipe end, fitting socket and heating tools correspond in such a way that the necessary jointing pressure is attained during jointing, resulting in a homogeneous joint.  

• Mobile, very compact and universal plastic fusion machine for PP, PE and PVDF pipes and fittings for use in the workshop and on job sites. Butt fusion d 32 - 160 mm, all pressure ratings up to PE/PP SDR 11; PVDF SDR 21. Socket fusion d 16 - 110 mm Base machine
  • high precision, distortion-free and robust machine base
  • handwheel for easy moving of machine carriage
  • exact pressure adjustment via direct load transfer
  • hardened, hard-chrome plated guide shafts for extreme loads
  • handle for safe transport of machine
  • All clamping possibilities for base clamping plates, pipe supports, back stop and prismatic clamping devices.
  Planer
  • planing device made of light cast aluminium
  • optimised cutting geometry for even and chatter-free planing
  • powerful parallel planer, swivels in and out for single or double-sided facing of pipe ends 620 W
  • integrated pick up for easy mounting of calibration tools for machining of pipe ends in socket fusion
  Heater
  • high-performance and precision heater with electronic temperature control 1500 W
  • high accuracy of +/- 4°C over the entire heating surface
  • heater temperature can be set exactly with digital LCD
  • high quality, non-stick, easy to change PTFE fabric
  Additional standard equipment on the basic model
  • V-shaped pipe supports d 16 - 160 mm for fittings
  • timer to clock fusion times
  • tool set specified to machine
  • Including transport packaging, without accessories

]]> https://www.vibtis.al/products/sg-125-socket-fusion-machine/ Sun, 09 Sep 2018 17:43:38 +0000 http://plagjiature.com/vibtis/?post_type=product&p=5810 In this form of fusion jointing, which requires heating tools, the pipe end is inserted into the socket of the fitting; no additional material is used. The pipe end and fitting socket are heated to fusion temperature using a heating bush and a heating spigot, respectively, and are then pushed together. GF Piping Systems offers a wide range of hand and mechanical guided fusion machines – also for the field-use. The pipe end, fitting socket and heating tools correspond in such a way that the necessary jointing pressure is attained during jointing, resulting in a homogeneous joint.  

• Portable heating element - socket fusion machine for use in the workshop and on job sites.
• For fusion jointing of PP, PE, PB and PVDF pipes and fittings; dimension 20 - 125 mm
• BASE MACHINE
• Compact, sturdy design, distortion-free machine bed
• Handwheel with torque locking mechanism for the slide movement
• Fast selection of insertion depth according to the pipe dimension
• HEATER
• With electronic temperature control
• High temperature accuracy over the entire heating surface
• ADDITIONAL STANDARD EQUIPMENT
• Universal, left and right prismatic clamping devices, complete, for clamping pipe and fittings. Additional set of prismatic clamping devices for outer clamping of pipes available as an option.
• V-shaped pipe support d 20 - 125 mm
• Back stop
• Machine specific tool set
• Timer to clock fusion times
• Including transport packaging, without accessories

]]> In this form of fusion jointing, which requires heating tools, the pipe end is inserted into the socket of the fitting; no additional material is used. The pipe end and fitting socket are heated to fusion temperature using a heating bush and a heating spigot, respectively, and are then pushed together. GF Piping Systems offers a wide range of hand and mechanical guided fusion machines – also for the field-use. The pipe end, fitting socket and heating tools correspond in such a way that the necessary jointing pressure is attained during jointing, resulting in a homogeneous joint.  

• Portable heating element - socket fusion machine for use in the workshop and on job sites.
• For fusion jointing of PP, PE, PB and PVDF pipes and fittings; dimension 20 - 125 mm
• BASE MACHINE
• Compact, sturdy design, distortion-free machine bed
• Handwheel with torque locking mechanism for the slide movement
• Fast selection of insertion depth according to the pipe dimension
• HEATER
• With electronic temperature control
• High temperature accuracy over the entire heating surface
• ADDITIONAL STANDARD EQUIPMENT
• Universal, left and right prismatic clamping devices, complete, for clamping pipe and fittings. Additional set of prismatic clamping devices for outer clamping of pipes available as an option.
• V-shaped pipe support d 20 - 125 mm
• Back stop
• Machine specific tool set
• Timer to clock fusion times
• Including transport packaging, without accessories

]]>